News

Home/News/Details

How The Cryo Pneumatic Shoulder Brace Works

A Cryo Pneumatic Shoulder Brace is a revolutionary new therapeutic treatment that works to increase mobility and relieve pain in the shoulder joint. Made of high-quality silicone, this revolutionary brace features an injection mold technology that creates a small amount of silicone to construct the brace. This silicone is mixed with polystyrene and a powder-based adhesive to create a hard but flexible brace that can be used for therapy sessions. Injection mold technology means that the brace is durable enough to withstand daily wear and tear, while also being easy to remove and replace when needed.


The process of putting these braces on the shoulder does not require any special preparation or equipment. They are applied with the same care and rigidity as any other cosmetic plastic brace, such as a compression sleeve or arthroscope device. The patient lies face down under a medical examination table and a high-pressure method is used to apply the braces. Once secured, a customized cryo-pneumatic technique is used to apply the liquid silicone into the shoulder joint.


It is important to note that these braces should only be used after the doctor has carefully evaluated the shoulder and ruled out any more serious medical conditions or injuries. Any and all previous treatments should be discontinued in order to prevent possible further complications. The patient then receives instructions for wearing and removing the braces. The process of removal is similar to that of wearing most standard braces, although it may take slightly longer due to the increased pressure required to remove the braces.


To begin, the doctor places a custom-fitted cryo-pneumatic shoulder brace on the shoulder. This brace provides the patient with the pressure necessary to treat the shoulder joint and promote healing. Once fitted properly, the doctor places adhesive gel on the top surface of the braces to seal the gel during the time the braces are in use. This seal ensures the braces remain in place and prevent them from coming off or becoming misplaced.


In order to begin to treat the joint, a set of instructions is given to the patient prior to the braces are put in place. These instructions include taking the braces off at least once a day, and cleaning the brackets and bands if the patient is cleaning their braces. The patient should also follow the instruction manual given by their orthodontist in order to care for their cryo-pneumatic shoulder brace. This includes cleaning the brackets and bands and ensuring the correct maintenance of the brackets and bands. If the patient fails to care for their cryo-pneumatic shoulder brace properly, then the braces could damage the healing process and decrease the effectiveness of the treatment.


After the braces are applied and the adhesive gel is properly removed, the patient must ensure they walk around using their brace in order to help the braces properly align the joint. After a few days, the braces will need to be taken off and the patient will be given instructions as to how to properly care for the cryo-pneumatic shoulder brace. The patient should clean their hands with soap and water before putting the braces back on, and they should ensure they wash their hands after removing the braces. If the patient does not care for their cryo-pneumatic shoulder brace correctly, then they may find that the braces become loose over time and the braces will no longer work in order to hold the joint in place, which can cause significant pain for the patient.