Products

Orthopedic-hinged-knee-support-brace
video
Orthopedic-hinged-knee-support-brace

Orthopedic-hinged-knee-support-brace

Adjustable OA Unloader Knee Brace with 3-Point Leverage and Varus/Valgus Alignment Control for Unicompartmental Knee Support

Model Number: KN-003
Type: OA Unloader Knee Brace
Support Area: Knee Joint / Medial or Lateral Compartment
Support Function: Knee Load Redistribution and Stabilization
Support System: 3-Point Leverage Structure
Adjustment: Varus / Valgus Alignment and ROM Hinge
Material: PP, POM, Aluminum, Nylon, EVA, Fabric, Lycra, Sponge
Size: Universal
Side: Left / Right Options
Color: Gray / Black / OEM
OEM / ODM Service: Available
Send Inquiry
Product Introduction

Product Overview

 

Targeted Knee Support for Unicompartmental Osteoarthritis

 

Knee osteoarthritis does not always affect the entire joint equally. In unicompartmental OA, the medial or lateral compartment may carry a greater share of the load, making the direction of knee support an important part of brace selection.

 

The KN-003 3-Point OA Knee Brace uses an adjustable leverage structure to apply corrective support across the knee. Its varus/valgus mechanism allows the support direction to be set according to the affected compartment and the required alignment.

 

An articulated hinge allows controlled knee movement, while rigid structural components and padded contact areas help maintain the brace's position around the joint.

 

KN-003 is available in left- and right-side configurations with a universal adjustable fit. It is intended primarily for mild to moderate unicompartmental osteoarthritis and associated knee stability requirements.

 

Products Key Features

 

3-point OA knee brace for unicompartmental osteoarthritis

3-Point Leverage System

The brace applies support through a three-point arrangement around the knee. This mechanism is intended to redistribute loading away from the affected joint compartment rather than simply compressing the knee from all sides.

 

Adjustable Varus/Valgus Mechanism

The alignment mechanism can be adjusted to suit the direction of support required for medial or lateral compartment osteoarthritis. Correct setup depends on the user's knee alignment and the intended unloading direction.

Articulated Knee Hinge

A mechanical hinge allows the knee to bend while the brace maintains its external support. The adjustable ROM mechanism also permits selected movement restrictions when required.

Rigid Structural Frame

PP, POM and aluminum components form the principal support structure. These materials provide reinforcement around the knee without relying entirely on elastic compression fabric.

Padded Contact Sections

EVA, sponge and textile contact areas sit between the support structure and the leg, providing cushioning where the brace contacts the body.

orthopedic hinged knee brace with varus valgus alignment adjustment

 

adjustable OA knee unloader brace with rigid support frame

Left and Right Configurations

KN-003 is offered with left- and right-side options. Selecting the appropriate side is important because the support arrangement must correspond to the knee being fitted.

 

Universal Adjustable Sizing

The adjustable configuration allows fitting to different adult leg dimensions. Proper positioning of the leverage system remains essential for the brace to function as intended.

 

 

Certifications & Export Readiness
Certifications & export readiness:

Designed to meet CE, ISO 13485 and FDA regulatory requirements; suitable for global markets (Europe, North America, Middle East, Latin America, Asia).

 

Contact now

 

Technical Specifications

 

Item

Specification

Product Name

3-Point OA Knee Brace

Model Number

KN-003

Product Type

OA Unloader Knee Orthosis

Primary Application

Unicompartmental Knee Osteoarthritis

Support Area

Knee Joint / Medial or Lateral Compartment

Support Mechanism

3-Point Leverage

Alignment Adjustment

Varus / Valgus

Hinge System

Adjustable ROM Hinge

Support Function

Load Redistribution / Knee Stabilization

Frame Materials

PP / POM / Aluminum

Other Materials

Nylon / EVA / Fabric / Lycra / Sponge

Contact Areas

Padded Support Sections

Size

Universal

Side Options

Left / Right

Color

Gray / Black / OEM

OEM / ODM

Available

 

Application / Usage

 

KN-003 is primarily intended for:

 

  • Mild to moderate unicompartmental knee osteoarthritis
  • Medial compartment OA support
  • Lateral compartment OA support
  • Varus or valgus alignment assistance
  • Knee load redistribution
  • Joint instability associated with compartmental loading
  • Clinician-directed knee rehabilitation
  • Supported daily walking and mobility

 

Matching the Brace to the Affected Compartment

The choice of unloading direction is not interchangeable for every patient. Medial and lateral compartment OA may require different adjustment directions, and left/right brace selection must also be considered.

KN-003 should be fitted according to the affected compartment, knee alignment and clinical requirements.

It is not intended to serve as a substitute for a postoperative knee immobilizer when strict immobilization is required.

 

Description

 

How the Adjustable OA Support System Works

 

 

Unlike a conventional hinged knee sleeve, KN-003 incorporates a leverage mechanism intended to influence how load is distributed across the knee joint.

 

The three-point arrangement applies support at different locations along the brace. By adjusting the varus/valgus mechanism, the fitter can change the direction of the corrective support according to the compartment requiring unloading.

 

The hinge serves a separate purpose: it allows controlled knee flexion and extension while the structural frame remains in position. This distinction matters because alignment adjustment and ROM adjustment are two different functions.

 

The padded contact sections help distribute pressure between the frame and the leg. During fitting, the brace should be positioned so that the hinge aligns with the knee and the support components remain in their intended locations.

 

For distributors selecting between OA and rehabilitation braces, KN-003 belongs to the unicompartmental OA support category, rather than the general-purpose postoperative immobilization category.

 

BOSEGROW offers OEM branding, labeling and packaging options for KN-003 orders.

 

FAQ

 

Q: What is the KN-003 OA Knee Brace designed for?

A: KN-003 is intended for mild to moderate unicompartmental knee osteoarthritis. Its three-point leverage system and alignment adjustment are used to provide targeted knee support and load redistribution.

Q: How does the 3-point leverage system work?

A: The support system applies forces at three locations around the leg to influence loading across the knee joint. The direction and amount of adjustment should be selected according to the affected compartment and professional fitting requirements.

Q: Can KN-003 be used for medial and lateral knee osteoarthritis?

A: The product is offered for medial or lateral compartment support. The appropriate configuration and adjustment direction must match the user's knee condition.

Q: What is the purpose of the varus/valgus adjustment?

A: Varus/valgus adjustment allows the fitter to modify the brace's alignment support. It is intended to influence compartmental loading, not to permanently correct the underlying bone alignment.

Q: Does KN-003 have an adjustable ROM hinge?

A: Yes. The existing KN-003 specification includes an adjustable ROM hinge for controlled knee movement. The exact available angle settings should be confirmed against the current hardware specification before they are published.

Q: How is KN-003 different from a regular hinged knee brace?

A: A regular hinged knee brace primarily provides joint stability. KN-003 adds a three-point leverage and varus/valgus adjustment system intended for compartment-specific OA support.

Q: Is KN-003 available for both knees?

A: Yes. Left- and right-side options are listed for KN-003. The correct side should be selected when ordering.

Q: What materials are used?

A: The listed materials are PP, POM, aluminum, nylon, EVA, fabric, Lycra and sponge. These are used across the structural and padded components of the brace.

Q: Is KN-003 available in different sizes?

A: The current product specification lists a universal adjustable size. Users should still check leg dimensions and fitting requirements before selection.

Q: Does BOSEGROW provide OEM services?

A: Yes. OEM options can include branding, product labels and packaging according to the order requirements.

(0/10)

clearall