Telescopic ROM Knee Brace

ROM Knee Brace for Controlled Post-Operative Motion

The KN-005 Telescopic ROM Knee Brace is designed for situations where the knee needs firm support while flexion and extension are introduced in controlled stages.

Its bilateral hinge system allows selected motion limits to be set rather than keeping the knee permanently fixed in one position. Telescopic side bars can be adjusted from approximately 19 to 24 inches, helping the brace fit different leg lengths without tools.

Long side supports add medial and lateral stability, while condyle pads improve contact around both sides of the knee. Anti-migration silicone contact areas help reduce unwanted movement of the brace during wear.

KN-005 is intended for ligament rehabilitation, post-operative knee support and controlled range-of-motion programs under professional guidance. The existing Bosegrow product data specifically lists ACL/PCL instability and motion limitation after reconstruction surgery among its applications.

• Adjustable ROM Hinge

The side hinges allow flexion and extension limits to be selected at defined angles, making it possible to change the permitted knee motion as rehabilitation progresses.

• Tool-Free Length Adjustment

The side bars extend from approximately 19 to 24 inches. Length can be changed without additional tools to suit different leg proportions.

• Multi-Center Hinge Design

The hinge structure follows knee movement more naturally than a fixed straight immobilizer while still providing controlled motion.

• Long Side Stabilizers

Extended support bars run along both sides of the leg to provide additional medial and lateral knee stability.

• Bilateral Condyle Pads

Pads around the medial and lateral femoral condyles improve contact between the brace and the knee joint area.

• Silicone Anti-Migration Support

Silicone contact areas help reduce brace migration during movement and repeated rehabilitation use.

• Universal Adjustable Fit

The combination of telescopic length adjustment and adjustable straps allows one brace configuration to accommodate a broad range of adult users.

• Controlled or Fixed Positioning

Depending on the selected hinge setting, the brace can either allow movement within a controlled range or hold the knee at a chosen fixed angle.

The KN-005 Telescopic ROM Knee Brace is commonly used for:

 

• Post-operative knee rehabilitation
• ACL rehabilitation support
• PCL rehabilitation support
• Ligament instability support
• Controlled flexion and extension training
• Range-of-motion restriction after reconstruction
• Knee joint stabilization
• Recovery-stage walking support
• Medium and low-impact activity during later rehabilitation stages

 

Unlike a basic knee sleeve, KN-005 is intended for situations where knee motion needs to be deliberately limited or gradually increased during rehabilitation. The exact ROM setting and wearing schedule should follow professional guidance.

 

The KN-005 Adjustable ROM Knee Brace combines a telescopic support frame with bilateral adjustable hinges for controlled knee rehabilitation.

The hinge system allows specific flexion, extension or fixed-position settings to be selected, while the long side bars provide structural support around the knee. Tool-free length adjustment makes the frame adaptable to different leg lengths without replacing the brace.

Condyle padding improves contact around the knee joint, and silicone anti-migration areas help keep the brace in position during movement. The black universal-size design is available with OEM logo, labeling and packaging customization for orthopedic and rehabilitation supply projects.

 

Instead of focusing only on product specifications, this Knee Brace is developed with real B2B project execution in mind.

We provide flexible OEM and ODM support to match different market requirements, including:

• Custom logo application on brace or components
• Retail-ready packaging design and adjustment
• Instruction manual localization and branding
• Carton labeling and shipment marking compliance
• Structural or detail modifications based on target market feedback

In practical cooperation, buyers tend to prioritize consistency over complexity - from sampling accuracy to mass production stability, and from packaging details to shipment readiness.

This is why this Knee Support is positioned not just as a single product, but as a reliable, repeat-order solution that fits long-term supply partnerships.

Looking for a reliable knee brace manufacturer?
Contact BOSEGROW for OEM solutions, bulk pricing, and fast delivery.

Click the button to view the product right now.

More knee Immobilizer with other functions: Click here

For buyers working on bulk orders, product structure is only part of the decision. Supply stability, inspection control, and document support matter just as much.

We support buyers from sample confirmation to mass production. During production, the focus is on material consistency, hinge assembly, stitching quality, strap fixing, and final product inspection before packing. These are the points that usually affect repeat orders, especially for products that need both support strength and wearing comfort.

>

About Us

For private label and distribution projects, we can also support packaging setup, product labeling, and basic document preparation based on market requirements. Certification and compliance documents can be provided according to the product model and order needs.

This gives buyers a clearer path from product selection to launch, instead of treating the brace as a one-time purchase item.

>

Get free samples and quotes >>

Bosegrow specializes in manufacturing orthopedic knee braces and rehabilitation supports for global medical distributors and OEM partners. Our OA unloader knee braces are designed for long-term comfort, reliable stabilization, and professional osteoarthritis support solutions.

Industry Knowledge Pertaining to This Knee Brace Product：Click here