Products

Dial-Lock ROM Knee Brace
video
Dial-Lock ROM Knee Brace

Dial-Lock ROM Knee Brace

Product Name: Dial-Lock ROM Knee Brace

Model Number: KN-002
Product Type: Adjustable ROM Knee Brace / Post Op Knee Brace
Application: Post-Operative Immobilization / Ligament Rehabilitation / Knee Motion Control
Support Area: Knee Joint
ROM System: Adjustable Dial-Lock Hinges
Extension Limit: 0° / 15° / 30° / 45° / 60° / 75° / 90°
Flexion Limit: 0° / 15° / 30° / 45° / 60° / 75° / 90° / 105° / 120°
Immobilization Limit: 0° / 15° / 30° / 45° / 60° / 75° / 90°
Length Adjustment: Approx. 19–27 Inches
Material: Fabric, Foam Padding, Plastic Components, Aluminum Support
Size: Universal
Color: Black / OEM
Fit Type: Telescopic Adjustable Fit
Brand: Bosegrow / OEM Available
Send Inquiry
Product Introduction

Product introduction

 

The KN-002 ROM knee brace is designed for controlled knee positioning during post-operative rehabilitation, pre-operative support and ligament injury recovery.

Its bilateral dial-lock hinges allow flexion, extension and immobilization angles to be adjusted in 15° increments. The telescopic frame can also be lengthened or shortened to better match different leg proportions and the required support position.

As a post op knee brace, KN-002 can be used when knee movement needs to be limited during early rehabilitation and then gradually increased as recovery progresses. Multiple adjustable straps help secure the brace around the thigh and lower leg.

The length-adjustable frame also makes KN-002 a practical telescopic knee brace for orthopedic and rehabilitation supply programs where one universal-size brace needs to accommodate different adult users.

Adjustable ROM Knee Brace

 


 

Characteristic

 

Adjustable ROM Dial-Lock Hinges

The side hinges allow the permitted knee movement to be changed according to different rehabilitation stages.

Extension Adjustment

Extension can be limited at:

0° / 15° / 30° / 45° / 60° / 75° / 90°

Flexion Adjustment

Flexion can be limited at:

0° / 15° / 30° / 45° / 60° / 75° / 90° / 105° / 120°

Immobilization Settings

The hinge can also be fixed at selected positions from:

0° to 90° in 15° increments

Telescopic Length Adjustment

The support frame adjusts from approximately 19" to 27", allowing the telescopic knee brace to adapt to different leg lengths and support positions.

Adjustable Strap Fixation

Multiple straps around the thigh and lower leg help maintain the brace in position and allow fitting pressure to be adjusted.

Padded Contact Areas

Soft padded contact areas help improve comfort between the brace frame and the leg during extended rehabilitation use.

Structured Side Support

Long bilateral support bars provide medial and lateral reinforcement around the knee joint while the ROM hinges control permitted movement.

 

telescopic knee brace

 


 

Indication

 

The KN-002 post op knee brace can be used for:

  • Post-operative knee immobilization
  • Pre-operative immobilization due to pain
  • Patella dislocation support
  • Conservative ligament injury treatment
  • Knee ligament rehabilitation
  • Controlled range-of-motion training
  • Sports injury rehabilitation
  • Knee joint stabilization

The exact ROM setting and rehabilitation schedule should follow professional medical or rehabilitation guidance.

 

post op knee brace

 


 

Principle of Using Knee Joint Brace

 

A ROM knee brace is used when the knee requires structural support while flexion and extension need to be controlled.

During early rehabilitation, the hinge can be set to restrict movement or maintain a selected fixed position. As rehabilitation progresses, the permitted range can be changed according to the treatment plan.

The long side supports help provide additional medial and lateral stability, while the adjustable hinge system allows the knee to move within the selected range instead of being permanently immobilized.

ROM knee brace

 


Evolution of Knee Rehabilitation Training Equipment

 

Modern postoperative knee braces combine structural stabilization with adjustable range-of-motion control.

Compared with a simple fixed knee immobilizer, KN-002 allows the permitted knee angle and overall brace length to be adjusted without replacing the whole support. This makes the brace suitable for staged rehabilitation where support requirements change over time.

The combination of dial-lock hinges, telescopic side bars and adjustable straps provides a practical solution for hospital, rehabilitation and orthopedic supply applications.

 


 

Details

 

Item: Dial-Lock ROM Knee Brace

Model Number: KN-002

Product Type: Adjustable ROM Knee Brace

Size: Universal

Color: Black / OEM

Material: Fabric, Foam Padding, Plastic Components, Aluminum Support

ROM Adjustment: 15° Increment Dial-Lock System

Extension Limit: 0°–90°

Flexion Limit: 0°–120°

Immobilization Limit: 0°–90°

Length Adjustment: Approx. 19"–27"

Application: Post-Operative Immobilization, Ligament Rehabilitation, Knee Motion Control

OEM Service: Logo / Label / Packaging Customization Available

 


 
FAQ

Q: What is KN-002 used for?

A: KN-002 is an adjustable ROM knee brace for postoperative immobilization, ligament rehabilitation and controlled knee motion.

Q: Can the knee angle be adjusted?

A: Yes. The dial-lock hinges allow flexion, extension and immobilization settings to be changed in 15° increments.

Q: What is the flexion adjustment range?

A: Flexion can be limited from 0° to 120° using the available hinge settings.

Q: Can KN-002 be used as a post op knee brace?

A: Yes. It is designed for postoperative fixation and staged range-of-motion rehabilitation under professional guidance.

Q: Is the brace length adjustable?

A: Yes. The telescopic frame adjusts from approximately 19 to 27 inches.

Q: What color is available?

A: Black / OEM.

Q: What size is available?

A: KN-002 is Universal Size.

Q: Is OEM customization available?

A: Yes. Logo, labeling and packaging customization can be provided for wholesale and private-label orders.

(0/10)

clearall