News

Home/News/Details

Rehabilitation Training Aids

Rehabilitation training aids

1. Upper limb training aids are used for rehabilitation training of shoulders, upper arms, forearms, and hands. (1) Shoulder joint rotation trainer: performs shoulder joint rotation movements, expands range of motion, and enhances shoulder muscle strength. (2) Shoulder lift trainer: trains upper limb lifting function by placing sticks at different heights. Sandbags can be hung at both ends of the stick to increase resistance. (3) Shoulder ladder: By continuously moving up the ladder with fingers, gradually increasing the range of motion of the shoulder joint and reducing pain. (4) Pulley and lifting ring trainer: increases the range of motion of the shoulder joint, and can also be used for joint traction and muscle strength training. (5) Upper limb recommendation trainer: improves upper limb extensor muscle strength, upper limb joint range of motion, and coordination ability. (6) Elbow joint traction chair: used for continuous traction of the elbow joint, for individuals with elbow joint flexion and extension movement disorders. The weight and direction of traction, seat height, and fixing parts can be adjusted as needed. (7) Forearm rotation trainer: trains joint mobility, prevents and improves forearm rotation function limitation. Simultaneously, muscle strength and endurance training are conducted through resistance exercises performed by patients under different resistance levels. (8) Wrist joint flexion and extension trainer: trains the range of motion and muscle strength of the wrist joint. (9) Wrist joint rotator: Train wrist joint rotation, improve joint mobility, and increase muscle strength and endurance. (10) Duplex Wall Puller: By actively moving with resistance, it improves muscle strength. Joint range of motion

Training to prevent deformities in the whole body muscles and joints. (11) Series dumbbells: used to enhance muscle strength and endurance. (12) Gymnastics sticks and throwing and receiving balls: improve upper limb range of motion, enhance limb coordination, control, and balance. There are two types: discrete and horizontal. (13) Hand support device: Training upper limb support ability and body transfer training from bed to wheelchair. (14) Finger strength training table: used for training finger strength and joint mobility. 2. Lower limb training aids are assistive devices used for training the lower limbs. (1) Lower limb rehabilitation trainer: used to train the range of motion and coordination function of lower limb joints. (2) Heavy hammer hip joint trainer: used to train the muscle strength of hip joint abduction and adduction. (3) Hip joint rotation trainer: improves hip joint rotation function through circular movements of the foot. (4) Quadriceps training chair: enhances muscle strength and joint mobility training, suitable for knee joint restriction. (5) Ankle joint flexion and extension trainer: trains the range of motion of the ankle joint, corrects foot sagging, internal and external foot flips, etc., and provides standing function training for individuals with standing dysfunction. (6) Ankle joint trainer: corrects lower limb posture, prevents foot sagging, inversion, eversion and other deformities. Standing training can also be conducted· (7) Ankle joint correction plate: used to correct and prevent deformities such as foot sagging, inversion, and eversion. (8) Stepper: Used for training lower limb range of motion and coordination function, there are two types: upright and seated.

(9) Stand up bed: used for standing training, including manual and electric options. 3. Comprehensive training aids are used for simultaneous training of multiple parts such as upper and lower limbs, shoulder and back muscles, joints, etc. (1) Ribs: Used for joint movement and muscle strength training of the upper and lower limbs, sitting, standing, and standing training, balance and trunk stretching training, and can also be used with shoulder ladders. (2) Stand: Used for training the standing function. There are standing training stands for children with cerebral palsy, single paraplegic standing stands, double paraplegic standing stands, four paraplegic standing stands, etc. Simultaneously prevent and improve osteoporosis, pressure ulcers, and decreased cardiovascular and pulmonary function. (3) Combination exercise trainer: composed of four pieces: shoulder joint rotation trainer, forearm rotation trainer, wrist joint flexion and extension trainer, and compound wall tension trainer. (4) Hemiplegic rehabilitation device: used for training hemiplegic patients, using the healthy limb to assist the affected limb in passive training, increasing joint mobility. (5) Functional traction grid: used for training muscle strength and joint mobility, with traction and relaxation adjustment functions. (6) Chest and back correction exercise device: used for training patients with chest and back deformities to prevent and correct chest and back deformities. (7) Rowing exercise equipment: used for muscle strength and endurance training of the waist and back, upper limb flexor muscle group, and lower limb extensor muscle group. (8) Series sandbags: used for muscle strength training, joint range of motion training, and joint flexion and extension training.

Walking series

1. Training Ladder

Purpose: Used to improve patients' walking ability training, the height of the handrail can be adjusted according to the patient's needs. 2. Drawer style stairs are used for simple training purposes and can also be used as seating fixtures of different heights. 3. The purpose of the balance bar is to use the upper limbs for gait training, to exercise the balance and stability of walking

4. The purpose of the assisted walking trainer is to increase the upper limb support area and improve the effectiveness of assisted walking. There are three types: regular, with brake seat, and foldable. 5. Imported rehabilitation specific electric jogging table is used for walking training at different speeds according to the needs of patients, in conjunction with overall protective frames and weight loss gait training devices. 6. The purpose of the assisted walking trainer is to increase the E-limb support area and improve the effectiveness of assisted walking.

Exercise upper limbs

1. Elbow joint traction chair

Purpose: To improve the range of motion of the elbow joint through elbow traction. 2. Purpose of wrist joint rotation trainer: To improve the range of motion of the wrist joint. 3. Purpose of shoulder joint rotation trainer: To perform shoulder joint rotation movements and expand the range of motion. Enhance shoulder muscle strength. 4. Shoulder lift trainer. Purpose: By placing the stick at different heights, train upper limb lifting function. 5. Shoulder ladder purpose: By continuously moving up the stairs with fingers, gradually increasing the range of motion of the shoulder joint and reducing pain. 6. Upper limb push training device purpose: Used for training upper limb muscle strength and coordinating activity. Improve the range of motion of upper limb joints. 7. Forearm Rotation Trainer Purpose: Used for training the internal and external rotation movements of the forearm. Joint mobility training. Prevent and improve restricted forearm rotation function. 8. The wrist joint flexion and extension trainer is used to improve the range of motion and muscle strength training of the wrist joint. Used for wrist flexion and extension training. 9. Series dumbbell usage: Used to enhance muscle strength and endurance. Suitable for individuals with low muscle strength such as muscle paralysis

10. Hand support device usage: Used by patients to support various movements with their hands. 11. Usage of upper limb coordination exercise device: Used for training upper limb stability and coordination. 12. Finger Function Trainer Purpose: Used for training finger operation functions. 13. Finger Ladder Usage: By training the adjacent two fingers of the four fingers except for the thumb to climb the ladder, the range of motion of the finger joints can be improved. 14. Fingerboard Usage: Used for training to suppress finger flexion tension and prevent finger flexion contracture. There are three types: those with directional wheels, those with partial directional wheels, and those with curved shapes.

Exercise lower limbs

1. Purpose of lower limb rehabilitation trainer: Used for training to improve the range of motion and coordination function of lower limb joints. 2. Heavy hammer hip joint trainer

Purpose: Used for muscle strength training of hip joint abduction and adduction in patients. 3. Usage of quadriceps training board: Used for active exercise training of quadriceps in patients with limited knee joint movement. 4. Usage of quadriceps training chair: joint range of motion training. Suitable for knee joint restriction. 5. Ankle joint trainer is a device used to correct lower limb posture and prevent deformities. Correct posture to prevent foot sagging, internal and external deformities. Standing training. 6. Ankle joint correction plate is used to correct and prevent deformities such as foot sagging, inversion, and eversion. 7. The purpose of the hemiplegia rehabilitation device is to use the healthy limb to assist the affected limb in passive training Increase the range of motion of joints. 8. Functional traction grid is used for training muscle strength and joint mobility. Improve muscle strength and joint mobility. Relax and adjust training. 9. Series sandbags are used for muscle strength training, joint range of motion training, and joint flexion and extension training. 10. Orthodontic Mirror Purpose: A mirror used by patients to observe the degree of gait and posture abnormalities for training purposes. 11. Purpose of OT comprehensive training workbench: for comprehensive training of upper limb and hand functions. Training the perception ability and brain of the affected limb

Ability to recognize graphics. 12. Purpose of OT desk: Used for upper limb function recovery, finger function, and cognitive training. 13. Application of hydraulic stepper: endurance training for lower limb mobility. 14. Purpose of PT bench: It is a movable seat used by therapists to perform manual therapy on patients. 15. Combination cushion use: Used for various exercises on the cushion for patients. Plays a protective role. 16. Wedge pad application: Suitable for children with uncontrollable head, unstable sitting, and low ability to automatically adjust body position. 17. Iron rod insertion board is used for coordination training, training fine finger movements and hand eye coordination ability. 18. Purpose of screwing: By simulating the practice of screwing, improve finger pointing function. 19. Adjustable wet sanding table is used for training to increase upper limb muscle strength and coordination, and improve upper limb joint mobility. 20. Purpose of the collar: Used for training trunk balance. Train hand eye coordination. Muscle strength training. Fun activities can improve psychological well-being.

Exercise the whole body

1. Multi functional combination training stand is used for combination training to improve the range of motion of all joints in the body. It is equipped with shoulder ladder, bare joint trainer, pulley, hanging ring trainer, composite wall brace, chest and back correction exercise device, shooting rack, rib cage. 2. Composite wall brace is used for limb strength training and joint range of motion training. 3. Passive limb trainer is used to drive the affected limb with a healthy body for muscle strength training. 4. Parallel bar is used for gait training with the help of the upper limbs to exercise the balance and stability of walking. 5. Cervical traction chair is used for cervical rehabilitation treatment. 6. PT training bed is used for on bed training activities

Blind assistive devices

1. Blind Ping Pong Ball Function: Suitable for people with low vision and the blind. The ball has beads that can make sound inside, and the player can judge the path of the ball based on the sound. 2. Blind football function: pure handmade sewing, ultra soft fabric material. Excellent foot feel - soft and comfortable, with a thick internal sound that satisfies your judgment of the position of the sphere. Suitable for sports activities for the blind. 3. Blind only chess

Function: Blind Oak Chess, with blind spots, suitable for leisure and entertainment for the blind. 4. Blind exclusive magnetic black and white chess function: suitable for entertainment of the blind. The chess pieces are magnetic products (black chess pieces have patterns on the surface, white chess pieces are smooth, easy for the blind to distinguish), attached to the chessboard. The chessboard is made of soft metal inside the cloth surface and has a grid outside, making it easy to fix the chess pieces and allowing the blind to touch them without causing them to become messy.

Deaf assistive devices

1. Function of daily conversation teaching materials for deaf people: a sign language teaching software suitable for general deaf people for daily conversation. 2. Deaf Sign Language Video Training Textbook Function: A software suitable for learning deaf people, deaf families, special education institutions, related units, and individuals.

Children's limb rehabilitation training aids

1. The purpose of the children's ladder back frame is to serve as an auxiliary device for walking or a support device for sitting and standing. 2. The six piece guided education combination set is used to adjust the sensitivity of the brain's sensory nerves, coordinate the overall nervous system function, and lay the foundation for brain development. 3. Purpose of the sitting posture correction chair for children with cerebral palsy: Suitable for correcting sitting posture in children with cerebral palsy. 4. The purpose of the children's sitting posture correction chair is to correct children's sitting posture training.

5. The purpose of the child safety standing stand is to provide fixed support for the chest, arms, knees, and feet of the child, allowing them to stand for a long time. 6. Crawler rack purpose: To train the upper limb support and crawling ability of children with cerebral palsy or developmental delay. 7. The purpose of the children's quadriceps training chair is to train the range of motion and muscle strength of lower limb joints in children. 8. Children's rib use: used for standing training, posture correction, sitting and standing transfer training for children. 9. Children's drum use: balance and coordination training. 10. Children's training slide is used for balance training. 11. Children's parallel bars are used for gait training, correcting poor gait, and enhancing muscle strength training. 12. The purpose of the children's staircase is to train the gait of children walking up and down stairs.

Children's cognitive rehabilitation training aids

1. The purpose of selecting and practicing rings is to improve children's perception and cognitive abilities, and to train hand eye coordination function. 2. The purpose of simulating fruits is to improve children's perception, cognitive ability, and train hand eye coordination function.

3. Purpose of Children's Cognitive Trainer: To train children's cognitive function. 4. Magnetic adhesive wood is used for finger grip training. 5. The purpose of the children's wave pool is to promote sensory and motor function recovery by engaging in various exercises in the pool and using stimuli such as touch and color perception. 6. The purpose of the abacus is to train cognitive abilities in numbers and arithmetic. 7. Geometry plugin purpose: Used for training patients' perception ability and brain's ability to recognize shapes. 8. Cognitive assembly building blocks are used to train cognitive abilities. Train upper limb coordination. 9. C-MGX Maze Trainer Purpose: Suitable for crawling training. 10. Geometric shape plug-in board is used to improve patients' perception of various shapes.