Products
Baseball Finger Splint
Model Number: FB-01
Type: Baseball Finger Splint
Support Area: Finger / Finger Joints / Fingertip
Support Function: Finger Immobilization and Positioning
Structure: Malleable Aluminum Finger Support
Fingertip Design: Curved Fold-Over End
Fixation: Two Bendable Aluminum Retaining Tabs
Inner Lining: Soft Foam Padding
Material: Aluminum, Foam
Color: Blue / OEM
OEM / ODM Service: Available
Send Inquiry
Product Introduction
Product Overview
Padded Aluminum Support That Can Be Shaped Around the Finger
The FB-01 Baseball Finger Splint uses a thin aluminum body lined with blue foam to hold an injured finger in a selected position. Unlike a flat splint that rests along one side of the finger, FB-01 has a curved end that folds over the fingertip, together with two bendable retaining tabs along the body.
The aluminum can be carefully shaped during fitting. Once positioned, the retaining tabs fold around the finger to help keep the splint in place, while the foam creates a cushioned surface between the skin and the metal.
This construction makes FB-01 an option for finger immobilization, fingertip protection and selected fracture or tendon-injury management applications where a clinician recommends external splinting.
Products Key Features
Malleable Aluminum Construction
The metal body can be shaped to the required finger position during fitting. Its bendable construction allows the support to follow the selected finger alignment instead of relying on a fixed molded angle.
Fold-Over Fingertip Protection
A curved aluminum section extends around the fingertip. This distinctive shape helps protect the distal finger area while maintaining contact with the underlying support.
Two Bendable Retaining Tabs
Two integrated aluminum tabs can be folded inward around the finger. They help secure the splint without requiring a separate mechanical buckle or hinge.
Soft Foam Inner Surface
Blue foam lines the finger-contact side of the splint, cushioning the skin from direct contact with the aluminum and helping reduce localized pressure from the metal edges.
Extended Finger Support
The elongated body supports more than just the fingertip. Its contact length allows the splint to be positioned along the finger according to the joint area requiring stabilization.
Lightweight, Low-Bulk Design
The aluminum-and-foam construction keeps the splint relatively slim. It does not require a palm plate, wrist strap or hand-enclosing support structure.
Simple Fitting Structure
The splint consists of a shaped aluminum body with integrated retaining tabs and padding. There are no dials, detachable locking parts or mechanical angle-adjustment components.
Certifications & export readiness:
Designed to meet CE, ISO 13485 and FDA regulatory requirements; suitable for global markets (Europe, North America, Middle East, Latin America, Asia).
Technical Specifications
|
Item |
Specification |
|---|---|
|
Product Name |
Baseball Finger Splint |
|
Model Number |
FB-01 |
|
Product Type |
Aluminum Finger Splint |
|
Support Area |
Finger / Distal Phalanx / Finger Joints |
|
Application |
Finger Immobilization / Injury Protection |
|
Structure Type |
Curved Aluminum Finger Support |
|
Main Material |
Malleable Aluminum |
|
Inner Material |
Foam Padding |
|
Fingertip Structure |
Fold-Over Protective End |
|
Fixation Method |
Two Bendable Retaining Tabs |
|
Adjustment Type |
Manual Aluminum Shaping |
|
Inner Contact Surface |
Foam-Padded |
|
Color |
Blue / OEM |
|
OEM / ODM |
Custom Logo / Label / Packaging |
Application / Usage
The FB-01 Baseball Finger Splint may be selected for:
- Stabilization of certain stable finger fractures
- Distal phalanx injury protection
- Mallet finger positioning when clinically appropriate
- Selected finger joint sprains
- Support following certain finger tendon injuries
- Finger immobilization after minor trauma
- Post-injury finger protection
- Clinician-directed finger rehabilitation
The splint position depends on the affected joint and the type of injury. For example, mallet finger treatment generally requires the distal interphalangeal joint to remain straight while the middle finger joint is allowed to move. FB-01 should be fitted accordingly rather than assuming that one splint position suits every finger injury.
Description
How the FB-01 Finger Splint Is Fitted
FB-01 has an aluminum base extending along the finger, a curved fingertip section and two bendable tabs for retention.
During fitting, the foam-lined surface is placed against the finger. The aluminum body is then shaped as needed to maintain the prescribed alignment, and the retaining tabs are folded inward to hold the splint in position.
Because the splint has no mechanical locking mechanism, correct sizing and shaping are particularly important. Excessive bending of the metal or pressure around the finger can create an uncomfortable fit. The final position should be checked to ensure that the intended joint is supported without unnecessary restriction of adjacent joints.
The combination of shapeable aluminum and foam padding gives orthopedic clinics and hand therapy suppliers a straightforward option for selected finger immobilization requirements.
For wholesale projects, BOSEGROW can discuss product labeling, packaging and available size assortments according to the order specification.
FAQ
Q: What is the FB-01 Baseball Finger Splint used for?
A: FB-01 is used to stabilize and protect an injured finger in a selected position. Applications may include certain stable finger fractures, joint injuries and tendon-related conditions when splinting is recommended.
Q: Can FB-01 be used for mallet finger?
A: It may be used if its shape and fit can maintain the required distal finger joint position. Mallet finger treatment needs careful immobilization of the fingertip joint, so suitability and application should be determined by a healthcare professional.
Q: Can the aluminum splint be bent?
A: Yes. The malleable aluminum construction allows the body and retaining tabs to be shaped during fitting. Adjustment should follow the required therapeutic position rather than forcing the finger into an arbitrary angle.
Q: How does the splint stay on the finger?
A: Two bendable aluminum retaining tabs fold around the finger to help hold the splint in place. Additional securing methods may be recommended depending on the injury and clinical fitting instructions.
Q: Does the splint have foam padding?
A: Yes. A blue foam lining covers the inner contact surface between the aluminum and the finger.
Q: What is the difference between a Baseball Finger Splint and a Frog Finger Splint?
A: FB-01 has an elongated aluminum body with a fold-over fingertip section and two retaining tabs. A frog finger splint uses a different, more compact pronged construction. They should not be treated as identical designs.
Q: Can the splint be used on different fingers?
A: The splint may be fitted to different fingers when its length, width and shape are appropriate. The correct size and required joint position should be checked before use.
Q: What materials are used in FB-01?
A: FB-01 uses a malleable aluminum support body with foam padding.
Q: Does BOSEGROW offer OEM customization?
A: Yes. OEM options include customized labeling and packaging, subject to the order specification and production requirements.
Previous:
No Information
Next:
Flat Finger Splint
Send Inquiry
